Festa Thumper Mini Pro2

Maintain the stress!

I simply acquired emails about mechanical issues with Thumper massager.

A gentleman was asking me if I knew about potential positions to interrupt the Thumper unit once more in working situations.

In the intervening time, I had no solutions for this individual (like an area repairer), however whereas I used to be investigating these percussion plenty, I discovered many evaluations that referred to as for customer support by cellphone (with actual individual) and talked by some frequent however easy repairs to the Thumper therapeutic massage items.

I'm unsure that these repairs are as easy for every therapeutic massage photograph, however the commonest Thumper software program I believe (MP2) appears to be a change and it appears to be a fairly straightforward repair.

Listed here are directions to right the failure

  • The partition has stopped working and it now not clicks between the settings that trigger the system. You cannot flip it on or off. .
  • It's a very long time for the mass to vibrate. Can this downside be corrected?
  • Each of those conditions happen when the rofans or switching system's inside connections are defective or damaged. I’ve the identical mannequin Thumper, MP2, and skilled the identical downside.

    Correction downside:

    First, you wish to verify and see if the change is shifting freely

    If the change is caught or fastened You clear the change connections and alter the housing (the plastic half is flowing in) after which reset the change.

    Don’t let the phrase "Refurbish" scare you (that is only a cool phrase for "re-assemble"), it's straightforward to do work and you don’t want any particular instruments, just a bit flat head screwdriver and perhaps Phillips head screwdriver ought to make a trick;

    What to do first:

    First, open the unit and clear the panel after the change. and the connection must be recycled if they’re damaged away from the contacts, if not, (and that is normally the case) have to clear the connection factors.

    Earlier than screwing one thing, do that First :

    * Unplug (really it's cowl), you see the precise change beneath.

    When you might have entry to the change, take a cotton wipe with 91% rub alcohol and clear the contact (remember the fact that there are a number of set of speed-controlled contacts).

    If a easy alcoholic drizzle doesn’t make the style, roll the metal roll somewhat roll roll effectively and firmly and maintain it on the highest of the change (when you might have switched open till

    With the metal wool in place, take a small flat screwdriver and transfer the metal wool up and down with the change till you see the touches clear.

    ] That is so Essential:

    You wish to ensure and blow extra woolen out of the facility earlier than assembling and testing the change.

    Once you obtain Thumper Mini Professional once more

    Get pleasure from!

    In case you have any issues or nonetheless work, please contact Thumper Inc. at 1-800-848-6737.


    Again to laptop The uproar I acquired

    Sadly, the issue was not the issue with Mr C's unit. The issue sounded a bit extra inside than soiled contact, however the issues he wanted have been accessible to him, he was simply not serious about deciding the machine itself and he was not excited to ship them for restore because of heavy delivery prices

    He advised me that they had two Mini Professionals who wanted a service and as you may think about, ship them to Canada and once more it's costly.

    He wished to know if anybody was right here in

    He bought some cycles and numerous objects from the service provider he went by however he didn’t wish to resolve on himself (if he might keep away from it).

    I advised him I’ve not had any deep mechanical issues with both the thumpers I’ve, only a minor switching downside, however on my web page I made a reference to a evaluate that acquired a few of the assist of the cellphone.

    I perceive that I don’t wish to proceed the N unit myself, however it's good to know that should you're so inclined then these are machines that may be achieved by the proprietor (as a substitute of being disposable) with correct steering.

    I used to be conscious that this

    My Private Expertise

    Sadly, I couldn’t assist Mr. C with the issue however I don’t. pity him as a result of I’ve two Thumpers myself and haven’t but skilled any main issues with both (I'm pushing a tree as I write this).

    I don’t like spending cash unnecessarily and delivery prices to Canada and again for something weighing 7 kilos might be not low cost so I'm very happy that Thumper is able to present spare components and directions for getting My machine once more, I might actually miss my Thumper if it had gone for 3 weeks.

    It feels like Mr. C would too, why else would h I’ve one if they didn’t precisely what they mentioned they did and do effectively.

    Supply by Dave Dillard

    Leave a Reply

    Your email address will not be published. Required fields are marked *